Can't start on Proxmox/Pi5

[PianSom]

Hi - looking to try this out, followed the Proxmox LXC instructions on a working Proxmox PXVIRT 9.0 on a Pi5 and got -

[OK] Container created
[INFO] Starting container...
explicitly configured lxc.apparmor.profile overrides the following settings: features:nesting
sync_wait: 34 An error occurred in another process (expected sequence number 7)
__lxc_start: 2119 Failed to spawn container "106"
startup for container '106' failed

[ERROR] Installation failed. Check the output above for errors.

[tvancott42]

Can you go into the LXC and then check the application logs?

[PianSom]

The LXC won't start up. And the only (unhelpful) log message I can find is

explicitly configured lxc.apparmor.profile overrides the following settings: features:nesting
sync_wait: 34 An error occurred in another process (expected sequence number 7)
__lxc_start: 2119 Failed to spawn container "106"

TASK ERROR: startup for container '106' failed

[tvancott42]

Dang. Unfortunately I've never run proxmox on a pi and I don't own any pi 5s so I won't be of too much help.

I'll dig into the LXC script and see what I find.

[tvancott42]

@PianSom did you have any luck running it outside of the LXC on your Pi 5? I looked into acquiring one for testing, but unfortunately they're a little out of my price range at the moment.

I did find one thing to fix in the Proxmox script and got that merged to main. That may get it working, so pull down that script again and give it a shot.

[PianSom]

Thanks for checking it out, but still no joy here. I will find another machine to try your code out on, but in the mean time - in case you can spot something - here is the entire stdout from the install (still can't find anything more useful):

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
  Confirm Settings
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

Container Settings:
  ID:        107
  Hostname:  network-optimizer
  Debian:    13
  RAM:       2048MB
  Swap:      512MB
  CPU:       2 cores
  Disk:      10GB
  Storage:   local
  Bridge:    vmbr0
  VLAN Tag:  none (untagged)
  IP:        dhcp
  SSH:       disabled

Application Settings:
  Timezone:       Europe/London
  Web UI Port:    8042 (fixed)
  Speedtest Port: 3005
  iperf3 Server:  disabled
  Host Redirect:  disabled
  Reverse Proxy:  none
  Geo Location:   disabled
  Password:       (auto-generate)

Proceed with installation? [Y/n]: 

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
  Downloading Container Template
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

[INFO] Finding Debian 13 template...
[OK] Found template: debian-13-standard_13.1-2_amd64.tar.zst
[OK] Template already downloaded

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
  Creating LXC Container
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

[INFO] Creating container 107 (network-optimizer)...
Formatting '/var/lib/vz/images/107/vm-107-disk-0.raw', fmt=raw size=10737418240 preallocation=off
Creating filesystem with 2621440 4k blocks and 655360 inodes
Filesystem UUID: 20b465cc-6a8b-4c45-b862-3c6203fc4fd3
Superblock backups stored on blocks: 
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
extracting archive '/var/lib/vz/template/cache/debian-13-standard_13.1-2_amd64.tar.zst'
Total bytes read: 551505920 (526MiB, 273MiB/s)
Detected container architecture: amd64
Creating SSH host key 'ssh_host_ecdsa_key' - this may take some time ...
done: SHA256:L/chyFPXVYfl26e1vHvKPkcDTFf/dn5NXpPWrs5Wq1A root@network-optimizer
Creating SSH host key 'ssh_host_ed25519_key' - this may take some time ...
done: SHA256:v1U0Vb1/kkjVyOI7epRjGHDKAtAAZV5qEzDZlpEXyrQ root@network-optimizer
Creating SSH host key 'ssh_host_rsa_key' - this may take some time ...
done: SHA256:JwwmR/KH34hR0MG4HNLh7ycpy5kVbzNjyTPMUv7Tdlw root@network-optimizer
[OK] Container created
[INFO] Starting container...
sync_wait: 34 An error occurred in another process (expected sequence number 7)
__lxc_start: 2119 Failed to spawn container "107"
startup for container '107' failed

[ERROR] Installation failed. Check the output above for errors.
To clean up the failed container:
  pct stop 107 2>/dev/null; pct destroy 107

[tvancott42]

Here's the key issue: [OK] Found template: debian-13-standard_13.1-2_amd64.tar.zst

It should be pulling in arm64.

Should be an easy fix, I'll get this figured out :)

[tvancott42]

Alright... I gave it my best shot @PianSom

Let me know if the new LXC script gets closer to working.

bash -c "$(wget -qLO - https://raw.githubusercontent.com/Ozark-Connect/NetworkOptimizer/main/scripts/proxmox/install.sh)"

bash -c "$(curl -fsSL https://raw.githubusercontent.com/Ozark-Connect/NetworkOptimizer/main/scripts/proxmox/install.sh)"