system-ovn.at

AT_SETUP([ovn -- 2 LRs connected via LS, gateway router, SNAT and DNAT])
AT_KEYWORDS([ovnnat])

CHECK_CONNTRACK()
ovn_start
OVS_TRAFFIC_VSWITCHD_START()
ADD_BR([br-int])

# Set external-ids in br-int needed for ovn-controller
ovs-vsctl \
        -- set Open_vSwitch . external-ids:system-id=hv1 \
        -- set Open_vSwitch . external-ids:ovn-remote=unix:$ovs_base/ovn-sb/ovn-sb.sock \
        -- set Open_vSwitch . external-ids:ovn-encap-type=geneve \
        -- set Open_vSwitch . external-ids:ovn-encap-ip=169.0.0.1 \
        -- set bridge br-int fail-mode=secure other-config:disable-in-band=true

# Start ovn-controller
start_daemon ovn-controller

# Logical network:
# Two LRs - R1 and R2 that are connected to each other via LS "join"
# in 20.0.0.0/24 network. R1 has switchess foo (192.168.1.0/24) and
# bar (192.168.2.0/24) connected to it. R2 has alice (172.16.1.0/24) connected
# to it.  R2 is a gateway router on which we add NAT rules.
#
#    foo -- R1 -- join - R2 -- alice
#           |
#    bar ----

ovn-nbctl create Logical_Router name=R1
ovn-nbctl create Logical_Router name=R2 options:chassis=hv1

ovn-nbctl ls-add foo
ovn-nbctl ls-add bar
ovn-nbctl ls-add alice
ovn-nbctl ls-add join

# Connect foo to R1
ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo \
    type=router options:router-port=foo addresses=\"00:00:01:01:02:03\"

# Connect bar to R1
ovn-nbctl lrp-add R1 bar 00:00:01:01:02:04 192.168.2.1/24
ovn-nbctl lsp-add bar rp-bar -- set Logical_Switch_Port rp-bar \
    type=router options:router-port=bar addresses=\"00:00:01:01:02:04\"

# Connect alice to R2
ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
    type=router options:router-port=alice addresses=\"00:00:02:01:02:03\"

# Connect R1 to join
ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24
ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \
    type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"'

# Connect R2 to join
ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24
ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \
    type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"'

# Static routes.
ovn-nbctl lr-route-add R1 172.16.1.0/24 20.0.0.2
ovn-nbctl lr-route-add R2 192.168.0.0/16 20.0.0.1

# Logical port 'foo1' in switch 'foo'.
ADD_NAMESPACES(foo1)
ADD_VETH(foo1, foo1, br-int, "192.168.1.2/24", "f0:00:00:01:02:03", \
         "192.168.1.1")
ovn-nbctl lsp-add foo foo1 \
-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

# Logical port 'alice1' in switch 'alice'.
ADD_NAMESPACES(alice1)
ADD_VETH(alice1, alice1, br-int, "172.16.1.2/24", "f0:00:00:01:02:04", \
         "172.16.1.1")
ovn-nbctl lsp-add alice alice1 \
-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"

# Logical port 'bar1' in switch 'bar'.
ADD_NAMESPACES(bar1)
ADD_VETH(bar1, bar1, br-int, "192.168.2.2/24", "f0:00:00:01:02:05", \
"192.168.2.1")
ovn-nbctl lsp-add bar bar1 \
-- lsp-set-addresses bar1 "f0:00:00:01:02:05 192.168.2.2"

# Add a DNAT rule.
ovn-nbctl -- --id=@nat create nat type="dnat" logical_ip=192.168.1.2 \
    external_ip=30.0.0.2 -- add logical_router R2 nat @nat

# Add a SNAT rule
ovn-nbctl -- --id=@nat create nat type="snat" logical_ip=192.168.2.2 \
    external_ip=30.0.0.1 -- add logical_router R2 nat @nat

# wait for ovn-controller to catch up.
OVS_WAIT_UNTIL([ovs-ofctl dump-flows br-int | grep ct\( | grep nat])

# 'alice1' should be able to ping 'foo1' directly.
NS_CHECK_EXEC([alice1], [ping -q -c 3 -i 0.3 -w 2 192.168.1.2 | FORMAT_PING], \
[0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

# North-South DNAT: 'alice1' should also be able to ping 'foo1' via 30.0.0.2
NS_CHECK_EXEC([alice1], [ping -q -c 3 -i 0.3 -w 2 30.0.0.2 | FORMAT_PING], \
[0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

# Check conntrack entries.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(172.16.1.2) | \
sed -e 's/zone=[[0-9]]*/zone=<cleared>/'], [0], [dnl
icmp,orig=(src=172.16.1.2,dst=30.0.0.2,id=<cleared>,type=8,code=0),reply=(src=192.168.1.2,dst=172.16.1.2,id=<cleared>,type=0,code=0),zone=<cleared>
])

# South-North SNAT: 'bar1' pings 'alice1'. But 'alice1' receives traffic
# from 30.0.0.1
NS_CHECK_EXEC([bar1], [ping -q -c 3 -i 0.3 -w 2 172.16.1.2 | FORMAT_PING], \
[0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

# We verify that SNAT indeed happened via 'dump-conntrack' command.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(30.0.0.1) | \
sed -e 's/zone=[[0-9]]*/zone=<cleared>/'], [0], [dnl
icmp,orig=(src=192.168.2.2,dst=172.16.1.2,id=<cleared>,type=8,code=0),reply=(src=172.16.1.2,dst=30.0.0.1,id=<cleared>,type=0,code=0),zone=<cleared>
])

# Add static routes to handle east-west NAT.
ovn-nbctl lr-route-add R1 30.0.0.0/24 20.0.0.2

# Flush conntrack entries for easier output parsing of next test.
AT_CHECK([ovs-appctl dpctl/flush-conntrack])

# East-west DNAT and SNAT: 'bar1' pings 30.0.0.2. 'foo1' receives it.
NS_CHECK_EXEC([bar1], [ping -q -c 3 -i 0.3 -w 2 30.0.0.2 | FORMAT_PING], \
[0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

# As we have a static route that sends all packets with destination
# 30.0.0.2 to R2, it hits the DNAT rule and converts 30.0.0.2 to 192.168.1.2
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(30.0.0.2) | \
sed -e 's/zone=[[0-9]]*/zone=<cleared>/'], [0], [dnl
icmp,orig=(src=192.168.2.2,dst=30.0.0.2,id=<cleared>,type=8,code=0),reply=(src=192.168.1.2,dst=192.168.2.2,id=<cleared>,type=0,code=0),zone=<cleared>
])

# As we have a SNAT rule that converts 192.168.2.2 to 30.0.0.1, the source is
# SNATted and 'foo1' receives it.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(30.0.0.1) | \
sed -e 's/zone=[[0-9]]*/zone=<cleared>/'], [0], [dnl
icmp,orig=(src=192.168.2.2,dst=192.168.1.2,id=<cleared>,type=8,code=0),reply=(src=192.168.1.2,dst=30.0.0.1,id=<cleared>,type=0,code=0),zone=<cleared>
])

OVS_APP_EXIT_AND_WAIT([ovn-controller])

as ovn-sb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as ovn-nb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as northd
OVS_APP_EXIT_AND_WAIT([ovn-northd])

as
OVS_TRAFFIC_VSWITCHD_STOP(["/failed to query port patch-.*/d"])
AT_CLEANUP

AT_SETUP([ovn -- 2 LRs connected via LS, gateway router, easy SNAT])
AT_KEYWORDS([ovnnat])

CHECK_CONNTRACK()
ovn_start
OVS_TRAFFIC_VSWITCHD_START()
ADD_BR([br-int])

# Set external-ids in br-int needed for ovn-controller
ovs-vsctl \
        -- set Open_vSwitch . external-ids:system-id=hv1 \
        -- set Open_vSwitch . external-ids:ovn-remote=unix:$ovs_base/ovn-sb/ovn-sb.sock \
        -- set Open_vSwitch . external-ids:ovn-encap-type=geneve \
        -- set Open_vSwitch . external-ids:ovn-encap-ip=169.0.0.1 \
        -- set bridge br-int fail-mode=secure other-config:disable-in-band=true

# Start ovn-controller
start_daemon ovn-controller

# Logical network:
# Two LRs - R1 and R2 that are connected to each other via LS "join"
# in 20.0.0.0/24 network. R1 has switchess foo (192.168.1.0/24) connected
# to it.  R2 has alice (172.16.1.0/24) connected to it.
# R2 is a gateway router on which we add NAT rules.
#
#    foo -- R1 -- join - R2 -- alice

ovn-nbctl lr-add R1
ovn-nbctl lr-add R2 -- set Logical_Router R2 options:chassis=hv1

ovn-nbctl ls-add foo
ovn-nbctl ls-add alice
ovn-nbctl ls-add join

ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
ovn-nbctl lrp-add R2 alice 00:00:02:01:02:03 172.16.1.1/24
ovn-nbctl lrp-add R1 R1_join 00:00:04:01:02:03 20.0.0.1/24
ovn-nbctl lrp-add R2 R2_join 00:00:04:01:02:04 20.0.0.2/24

# Connect foo to R1
ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo \
    type=router options:router-port=foo addresses=\"00:00:01:01:02:03\"

# Connect alice to R2
ovn-nbctl lsp-add alice rp-alice -- set Logical_Switch_Port rp-alice \
    type=router options:router-port=alice addresses=\"00:00:02:01:02:03\"

# Connect R1 to join
ovn-nbctl lsp-add join r1-join -- set Logical_Switch_Port r1-join \
    type=router options:router-port=R1_join addresses='"00:00:04:01:02:03"'

# Connect R2 to join
ovn-nbctl lsp-add join r2-join -- set Logical_Switch_Port r2-join \
    type=router options:router-port=R2_join addresses='"00:00:04:01:02:04"'

# Static routes.
ovn-nbctl lr-route-add R1 172.16.1.0/24 20.0.0.2
ovn-nbctl lr-route-add R2 192.168.0.0/16 20.0.0.1

# Logical port 'foo1' in switch 'foo'.
ADD_NAMESPACES(foo1)
ADD_VETH(foo1, foo1, br-int, "192.168.1.2/24", "f0:00:00:01:02:03", \
         "192.168.1.1")
ovn-nbctl lsp-add foo foo1 \
-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

# Logical port 'alice1' in switch 'alice'.
ADD_NAMESPACES(alice1)
ADD_VETH(alice1, alice1, br-int, "172.16.1.2/24", "f0:00:00:01:02:04", \
         "172.16.1.1")
ovn-nbctl lsp-add alice alice1 \
-- lsp-set-addresses alice1 "f0:00:00:01:02:04 172.16.1.2"

# Add a SNAT rule
ovn-nbctl -- --id=@nat create nat type="snat" logical_ip=192.168.1.2 \
    external_ip=172.16.1.1 -- add logical_router R2 nat @nat

# South-North SNAT: 'foo1' pings 'alice1'. But 'alice1' receives traffic
# from 172.16.1.1
NS_CHECK_EXEC([foo1], [ping -q -c 3 -i 0.3 -w 2 172.16.1.2 | FORMAT_PING], \
[0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

# We verify that SNAT indeed happened via 'dump-conntrack' command.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(172.16.1.1) | \
sed -e 's/zone=[[0-9]]*/zone=<cleared>/'], [0], [dnl
icmp,orig=(src=192.168.1.2,dst=172.16.1.2,id=<cleared>,type=8,code=0),reply=(src=172.16.1.2,dst=172.16.1.1,id=<cleared>,type=0,code=0),zone=<cleared>
])

OVS_APP_EXIT_AND_WAIT([ovn-controller])

as ovn-sb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as ovn-nb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as northd
OVS_APP_EXIT_AND_WAIT([ovn-northd])

as
OVS_TRAFFIC_VSWITCHD_STOP(["/failed to query port patch-.*/d"])
AT_CLEANUP

AT_SETUP([ovn -- load-balancing])
AT_KEYWORDS([ovnlb])

CHECK_CONNTRACK()
ovn_start
OVS_TRAFFIC_VSWITCHD_START()
ADD_BR([br-int])

# Set external-ids in br-int needed for ovn-controller
ovs-vsctl \
        -- set Open_vSwitch . external-ids:system-id=hv1 \
        -- set Open_vSwitch . external-ids:ovn-remote=unix:$ovs_base/ovn-sb/ovn-sb.sock \
        -- set Open_vSwitch . external-ids:ovn-encap-type=geneve \
        -- set Open_vSwitch . external-ids:ovn-encap-ip=169.0.0.1 \
        -- set bridge br-int fail-mode=secure other-config:disable-in-band=true

# Start ovn-controller
start_daemon ovn-controller

# Logical network:
# 2 logical switches "foo" (192.168.1.0/24) and "bar" (172.16.1.0/24)
# connected to a router R1.
# foo has foo1 to act as a client.
# bar has bar1, bar2, bar3 to act as servers.
#
# Loadbalancer VIPs in 30.0.0.0/24 network.

ovn-nbctl create Logical_Router name=R1
ovn-nbctl ls-add foo
ovn-nbctl ls-add bar

# Connect foo to R1
ovn-nbctl lrp-add R1 foo 00:00:01:01:02:03 192.168.1.1/24
ovn-nbctl lsp-add foo rp-foo -- set Logical_Switch_Port rp-foo \
    type=router options:router-port=foo addresses=\"00:00:01:01:02:03\"

# Connect bar to R1
ovn-nbctl lrp-add R1 bar 00:00:01:01:02:04 172.16.1.1/24
ovn-nbctl lsp-add bar rp-bar -- set Logical_Switch_Port rp-bar \
    type=router options:router-port=bar addresses=\"00:00:01:01:02:04\"

# Create logical port 'foo1' in switch 'foo'.
ADD_NAMESPACES(foo1)
ADD_VETH(foo1, foo1, br-int, "192.168.1.2/24", "f0:00:00:01:02:03", \
         "192.168.1.1")
ovn-nbctl lsp-add foo foo1 \
-- lsp-set-addresses foo1 "f0:00:00:01:02:03 192.168.1.2"

# Create logical ports 'bar1', 'bar2', 'bar3' in switch 'bar'.
ADD_NAMESPACES(bar1)
ADD_VETH(bar1, bar1, br-int, "172.16.1.2/24", "f0:00:0f:01:02:03", \
         "172.16.1.1")
ovn-nbctl lsp-add bar bar1 \
-- lsp-set-addresses bar1 "f0:00:0f:01:02:03 172.16.1.2"

ADD_NAMESPACES(bar2)
ADD_VETH(bar2, bar2, br-int, "172.16.1.3/24", "f0:00:0f:01:02:04", \
         "172.16.1.1")
ovn-nbctl lsp-add bar bar2 \
-- lsp-set-addresses bar2 "f0:00:0f:01:02:04 172.16.1.3"

ADD_NAMESPACES(bar3)
ADD_VETH(bar3, bar3, br-int, "172.16.1.4/24", "f0:00:0f:01:02:05", \
         "172.16.1.1")
ovn-nbctl lsp-add bar bar3 \
-- lsp-set-addresses bar3 "f0:00:0f:01:02:05 172.16.1.4"

# Config OVN load-balancer with a VIP.
uuid=`ovn-nbctl  create load_balancer vips:30.0.0.1="172.16.1.2,172.16.1.3,172.16.1.4"`
ovn-nbctl set logical_switch foo load_balancer=$uuid

# Config OVN load-balancer with another VIP (this time with ports).
ovn-nbctl set load_balancer $uuid vips:'"30.0.0.2:8000"'='"172.16.1.2:80,172.16.1.3:80,172.16.1.4:80"'

# Wait for ovn-controller to catch up.
OVS_WAIT_UNTIL([ovs-ofctl -O OpenFlow13 dump-groups br-int | grep ct\(])

# Start webservers in 'bar1', 'bar2' and 'bar3'.
NETNS_DAEMONIZE([bar1], [[$PYTHON $srcdir/test-l7.py]], [http1.pid])
NETNS_DAEMONIZE([bar2], [[$PYTHON $srcdir/test-l7.py]], [http2.pid])
NETNS_DAEMONIZE([bar3], [[$PYTHON $srcdir/test-l7.py]], [http3.pid])

dnl Should work with the virtual IP address through NAT
for i in 1 2 3 4 5 6 7 8 9 10 11 12; do
    echo Request $i
    NS_CHECK_EXEC([foo1], [wget 30.0.0.1 -t 5 -T 1 --retry-connrefused -v -o wget$i.log])
done

dnl Each server should have at least one connection.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(30.0.0.1)], [0], [dnl
tcp,orig=(src=192.168.1.2,dst=30.0.0.1,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.2,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
tcp,orig=(src=192.168.1.2,dst=30.0.0.1,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.3,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
tcp,orig=(src=192.168.1.2,dst=30.0.0.1,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.4,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
])

dnl Test load-balancing that includes L4 ports in NAT.
for i in 1 2 3 4 5 6 7 8 9 10 11 12; do
    echo Request $i
    NS_CHECK_EXEC([foo1], [wget 30.0.0.2:8000 -t 5 -T 1 --retry-connrefused -v -o wget$i.log])
done

dnl Each server should have at least one connection.
AT_CHECK([ovs-appctl dpctl/dump-conntrack | FORMAT_CT(30.0.0.2)], [0], [dnl
tcp,orig=(src=192.168.1.2,dst=30.0.0.2,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.2,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
tcp,orig=(src=192.168.1.2,dst=30.0.0.2,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.3,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
tcp,orig=(src=192.168.1.2,dst=30.0.0.2,sport=<cleared>,dport=<cleared>),reply=(src=172.16.1.4,dst=192.168.1.2,sport=<cleared>,dport=<cleared>),protoinfo=(state=<cleared>)
])


OVS_APP_EXIT_AND_WAIT([ovn-controller])

as ovn-sb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as ovn-nb
OVS_APP_EXIT_AND_WAIT([ovsdb-server])

as northd
OVS_APP_EXIT_AND_WAIT([ovn-northd])

as
OVS_TRAFFIC_VSWITCHD_STOP(["/failed to query port patch-.*/d"])
AT_CLEANUP