GreenHouse Irrigation System 🌱

Two independent Arduino projects in one repository.

📁 aquaflora - Manual watering with TFT display

Set watering duration (1-2048 sec) using potentiometer → press button to start. Shows countdown and progress bar on ST7735 display.

Hardware: ST7735 display, relay, button, potentiometer

📁 bochka - Automatic water tank control

Sensor detects no water for 30 min → pump turns ON. Water detected for 15 sec → pump turns OFF.

Hardware: relay, water level sensor

Both projects run on separate boards. No communication between them.

The system in greenhouse

The system in on the barrel

Wiring

📁 aquaflora / (Manual + TFT)

Component	Pin
TFT CS	10
TFT RST	9
TFT DC	8
TFT MOSI	11
TFT SCK	13
Relay (pump)	3
Button	2
Potentiometer	A0
TFT VCC	5V
Все GND	GND

---

📁 bochka / (Auto tank)

Component	Pin
Relay (pump)	3
Water sensor	2
VCC	5V
GND	GND

---

Folder structure for repo:

greenhouse-irrigation-system/
├── aquaflora/           # Project 1 (manual watering with display)
│   ├── photos/
│   ├── README.md
│   └── aquaflora.ino
├── bochka/              # Project 2 (auto-completion of the barrel)
│   ├── photos/
│   ├── README.md
│   └── bochka.ino
└── README.md            # Main README